de en pl swe

We are currently available for you

    Ordered today, shipped today.

    We may not be the biggest, but we are the quickest in our branch.

     

    Take advantage of our extremely short delivery times for 1/100 reamers from 0.1 mm to 13.5 mm. If you order before 11 am, we ship the same day.

     

    In addition to reamers, we also produce single- and multiple tooth milling cutters, engravers and de-burrers. In above average precision and at above average speed.


    Challenge us.

    Reamers

    We stock large quantities of all types of reamer (also intermediate sizes and special tolerances) and can thus delivery quickly.

    If you order before 11 am, they are usually shipped on the same day.

    Micro reamers

     

     

    Micro reamers



    Precision micro.reamers of SHN direct from the maker. Precision version, right-hand spiral, shank diameter 1.5 mm. 
    From 0.10 – 0.50 mm, 1/100 increments, with non-coated surface.



    Micro reamers

    Ø GL Schaft SL NL Z
    0,10 - 0,50 35 1,5 5 10 4

    Reamers 1/100

     

     

    SHM Reamers 1/100



    1/100 reamers, right-hand cutting with left-hand spiral to works standard (similar to DIN 212). From 0.5 mm – 13.5 mm, 1/1000 increment.

    Large quantity in stock for fast delivery.


    Tolerance

    Ø Tolerance
    0,30 - 3,00 0 / +0,003
    3,01 - 6,00 0 / +0,004
    6,01 - 18,10 0 / +0,005




    SHM Reamers 1/100

    Ø              O/AL Shank SL FL F
    0,10 - 0,19 35 1,5 10 x D 10 x D 3
    0,20 - 0,29 35 1,5 10 x D 10 x D 3
    0,30 - 0,48 35 1,5 5 10 4
    0,49 - 0,53 35 1,5 5 10 4
    0,54 - 0,59 35 1,5 5 10 4
    0,60 - 0,69 35 1,5 6 12 4
    0,70 - 0,79 35 1,5 6 12 4
    0,80 - 0,90 35 1,5 6 15 4
    0,91 - 1,00 35 1,5 8 15 4
    1,01 - 1,20 35 1,5 10 17 4
    1,21 - 1,50 40 1,5 12 23 4
    1,51 - 2,00 45 2 16 28 4
    2,01 - 2,40 50 2 18 31 4
    2,41 - 2,70 55 3 20 34 4
    2,71 - 3,10 60 3 20 39 4
    3,11 - 3,70 60 4 22 37 6
    3,71 - 4,10 65 4 24 40 6
    4,11 - 4,60 65 5 24 40 6
    4,61 - 4,90 65 5 26 38 6
    4,91 - 5,20 75 5 26 48 6
    5,21 - 5,70 75 5 26 48 6
    5,71 - 6,20 75 5 26 48 6
    6,21 - 6,60 80 6 30 49 6
    6,61 - 6,90 80 6 30 49 6
    6,91 - 7,20 95 7 35 59 6
    7,21 - 7,70 95 7 35 59 6
    7,71 - 8,20 95 7 35 59 6
    8,21 - 8,70 100 8 35 64 6
    8,71 - 8,90 100 8 35 64 6
    8,91 - 9,20 100 9 35 64 6
    9,21 - 9,70 100 9 35 64 6
    9,71 - 9,90 100 9 35 64 6
    9,91 - 10,70 100 10 35 64 6
    10,71 - 10,91 100 10 35 64 6
    10,91 - 11,20 100 11 35 64 6
    11,21 - 11,70 100 11 35 64 6
    11,71 - 11,90 100 11 35 64 6
    11,91 - 12,60 100 12 35 64 6
    12,61 - 12,90 100 13 35 64 6
    12,91 - 13,52 100 13 35 64 6
    13,90 - 14,10 100 14 35 64 6
    14,90 - 15,10 100 14 35 64 6
    15,90 - 16,10 100 16 35 64 6
    17,90 - 18,10 100 18 35 64 6
    19,90 - 20,10 100 18 35 64 6

     




    Reference values for SHM machine reamers​

    Feed per rotation

    Material Vc (m/min) 2 mm 6 mm 10 mm 14 mm
    Steel - 700 N 20 - 25 0,10 0,12 0,18 0,18
    Steel - 1100 N 12 - 18 0,08 0,10 0,18 0,18
    Steel - 1400 N 10 - 15 0,08 0,09 0,15 0,20
    Stainless steels 7 - 12 0,07 0,10 0,12 0,15
    Titanium 6 - 10 0,07 0,10 0,12 0,15
    Aluminium  < 160 HB 40 - 60 0,15 0,18 0,25 0,30
    Cast with flake graphite  < 180 HB 30 - 40 0,10 0,12 0,20 0,20
    Cast with spheroidal graphite  < 180 HB 30 - 40 0,10 0,12 0,20 0,20
    Hard cast  < 180 HB 8 - 10 0,07 0,10 0,15 0,18
    Special alloys < 260 HB 6 - 10 0,07 0,10 0,12 0,15
    Bronze 20 - 25 0,15 0,18 0,22 0,35
    Coppere 25 - 30 0,12 0,18 0,20 0,25
    Brass 35 - 40 0,20 0,22 0,30 0,35

    Overlength reamers


     

     

    SHM Overlength reamers

     

    Ø                         GL Schaft SL NL Z
    1,95 - 2,05 100 2 20 79 6
    2,95 - 3,05 100 3 20 79 6
    3,06 - 3,94 100 4 20 79 6
    3,95 - 4,05 100 4 24 75 6
    4,06 - 4,94 100 5 24 75 6
    4,95 - 5,05 100 5 26 73 6
    5,06 - 5,94 100 6 26 73 6
    5,95 - 6,05 100 6 26 73 6
               
    2,95 - 3,05 150 3 20 129 6
    3,06 - 3,94 150 4 20 125 6
    3,95 - 4,05 150 4 24 125 6
    4,06 - 4,94 150 5 24 123 6
    4,95 - 5,05 150 5 26 123 6
    5,06 - 5,94 150 6 26 123 6
    5,95 - 6,05 150 6 26 123 6
    6,06 - 6,94 150 6 26 123 6
    6,95 - 7,05 150 7 35 115 6
    7,06 - 7,89 150 7 35 115 6
    7,90 - 8,10 150 8 35 115 6
    8,11 - 8,89 150 8 35 115 6
    8,90 - 9,10 150 9 35 115 6
    9,11 - 9,89 150 9 35 115 6
    9,90 - 10,10 150 10 35 115 6
    10,11 - 10,89 150 10 35 115 6
    10,90 - 11,10 150 11 35 115 6
    11,11 - 11,89 150 11 35 115 6
    11,90 - 12,10 150 12 35 115 6
    12,11 - 12,89 150 12 35 115 6
    12,90 - 13,10 150 13 35 115 6
    13,11 - 13,89 150 13 35 115 6
    13,90 - 14,10 150 13 35 115 6
    14,11 - 14,891 150 14 35 115 6
    14,90 - 15,10 150 14 35 115 6
    15,90 - 16,10 150 16 35 115 6

    Reamers right-hand spiral


    Reibahle mit Innenkühlung

     

     

    Reamers with right-hand spiral

    1/100 increment to works standard specially for blind holes as the chippings are removed from the hole by the right-hand spiral.

    No clogging of chippings in the base of the hole!

    Intermediate sizes upon request.

     

     

    Ø                         GL Schaft SL NL Z
    1,51 - 2,00 45 2 16 28 4
    2,01 - 2,40 50 2 - 3 18 31 4
    2,41 - 2,70 55 3 20 34 4
    2,71 - 3,10 60 3 20 39 4 - 6
    3,11 - 3,70 60 4 22 37 6
    3,71 - 4,10 65 4 24 40 6
    4,11 - 4,60 65 5 24 40 6
    4,61 - 4,90 65 5 26 38 6
    4,91 - 5,20 75 5 26 48 6
    5,21 - 5,70 75 5 26 48 6
    5,71 - 6,20 75 5 - 6 26 48 6
    6,21 - 6,60 80 6 30 49 6
    6,61 - 6,90 80 6 - 7 30 49 6
    6,91 - 7,20 95 7 35 59 6
    7,21 - 7,70 95 7 35 59 6
    7,71 - 8,20 95 7 - 8 35 59 6
    8,21 - 8,70 100 8 35 64 6
    8,71 - 8,90 100 8 - 9 35 64 6
    8,91 - 9,20 100 9 35 64 6
    9,21 - 9,70 100 9 35 64 6
    9,71 - 9,90 100 9 - 10 35 64 6
    9,91 - 10,70 100 10 35 64 6
    10,71 - 10,90 100 10 - 11 35 64 6
    10,91 - 11,20 100 11 35 64 6
    11,21 - 11,70 100 11 35 64 6
    11,71 - 11,90 100 11 - 12 35 64 6
    11,91 - 12,60 100 12 35 64 6
    12,61 - 12,90 100 12 - 13 35 64 6
    12,91 - 13,52 100 13 35 64 6
    13,90 - 14,10 100 14 35 64 6
    14,90 - 15,10 100 14 35 64 6
    15,90 - 16,10 100 16 35 64 6
    17,90 - 18,10 100 18 35 64 6
    19,90 - 20,10 100 20 35 64 6

    Reamers with through cooling


     

     

     

    Reamers with through cooling

    Also available in 1/100 sizes.

    These reamers are right-hand cutting and produced straight fluted to works standard for blind holes.

    Other versions are available upon request.

     

     

    Ø GL Schaft SL NL  Z
    2,95 - 3,05 75 6 22 40 6
    3,06 - 3,96 75 6 24 40 6
    3,97 - 4,05 75 6 24 40 6
    4,06 - 4,96 75 6 24 40 6
    4,97 - 5,05 75 6 24 40 6
    5,06 - 5,96 75 6 24 40 6
    5,97 - 6,05 80 6 30 45 6
    6,06 - 6,47 80 6 30 45 6
    6,48 - 6,96 103 8 30 63 6
    6,97 - 7,05 103 8 30 63 6
    7,06 - 7,96 103 8 30 63 6
    7,97 - 8,05 103 8 35 63 6
    8,06 - 8,47 103 8 35 63 6
    8,48 - 8,96 103 10 36 63 6
    8,97 - 9,05 103 10 35 63 6
    9,06 - 9,96 103 10 35 63 6
    9,97 - 10,05 103 10 35 63 6
    10,06 - 10,47 103 10 35 63 6
    10,48 - 10,96 103 12 40 63 6
    10,97 - 11,05 103 12 40 63 6
    11,06 - 11,96 103 12 40 63 6
    11,97 - 12,10 103 12 40 63 6
    12,55 - 12,65 103 14 40 63 6
    12,97 - 13,10 103 14 40 63 6
    13,97 - 14,10 103 14 40 63 6
    15,95 - 16,10 103 16 40 63 6

    Reamers with internal cooling, side outlet


     

     

    Reamers with internal cooling, side outlet

     

     

    Ø GL Schaft SL NL  Z
    2,90 - 3,10 75 6 14 45 4
    3,90 - 4,10 75 6 14 45 4
    4,90 - 5,10 85 6 14 55 4
    5,90 - 6,10 85 6 14 55 4
    6,90 - 7,10 105 8 18 70 4
    7,90 - 8,10 105 8 18 70 4  
    8,90 - 9,10 115 10 22 75 6
    9,90 - 10,10 115 10 22 75 6
    10,90 - 11,10 115 12 22 75 6
    11,90 - 12,10 115 12 22 75 6
    12,90 - 13,10 115 14 24 75 6
    13,90 - 14,10 115 14 24 75 6

    Hart reamers


     

     

    Hard reamers 58 to 65 HRC

    1/100 increment, right-hand cutting, straight flute

     

    Ø                         GL Schaft SL NL Z
    2,95 - 3,05 75 6 12 40 6
    3,95 - 4,05 75 6 14 40 6
    4,95 - 5,05 75 6 14 40 6
    5,90 - 6,12 80 6 20 40 6
    6,90 - 7,12 100 8 20 60 6
    7,90 - 8,12 100 8 25 60 6
    8,90 - 9,12 100 10 25 60 6
    9,90 - 10,12 100 10 25 60 6
    10,90 - 11,12 100 12 30 60 6
    11,95 - 12,12 100 12 30 60 6
    12,90 - 13,12 100 14 30 60 6
    13,90 - 14,12 100 14 30 60 6
    14,90 - 15,12 100 14 30 60 6
    15,90 - 16,12 100 16 30 60 6

     

     

    Attention: Reamers are uncoated!
    To achieve an optimal result, a coating is absolutely necessary.

    Reamers with unevenly spaced flutes


    Reibahle mit Innenkühlung

     

    SHM Reamers with extremly unevenly spaced flutes

    to DIN 212
    1/100 incremental, right-hand cutting with left-hand spiral

     

     

    Ø                         GL Schaft SL NL Z
    2,95 - 3,05 61 3 15 33 6
    3,95 - 4,05 75 4 19 32 6
    4,95 - 5,05 86 5 23 52 6
    5,95 - 6,05 93 6 26 57 6
    6,95 - 7,05 109 7 31 69 6
    7,90 - 8,10 117 8 33 76 6
    8,90 - 9,10 125 9 36 81 6
    9,90 - 10,10 133 10 38 87 6
    10,90 - 11,10 142 11 41 96 6
    11,90 - 12,10 151 12 44 105 6
    12,90 - 13,10 151 13 44 105 6

     

    Milling Cutters

    Single- or multi-tooth cutter?

    The question of the ideal milling cutter is dependent upon the material to be machined. A single-tooth cutter is often an advantage for "soft" materials (PVC, Perspex, Kömacel, etc), wooden materials (chip- or flakeboard) and non-ferrous metals (soft aluminium, Alcubond, etc.), as the problem of cutting erosion in comparison to clogging recedes.
     

    A double flute is better suited to very hard plastics and harder types of aluminium (short chipping). Milling cutters with 4 or more flutes are predominantly used to mill metals.

     

    Single-tooth milling cutters
    Single-tooth milling cutters are mainly used for machining "soft" materials. Their extra large chipping space guarantees an ideal chipping removal and high stock removal rate.

     

    Multi-tooth milling cutters
    Multi-tooth milling cutters are used for machining "harder" materials. Smoother running is achieved, as several cutting edges are always in contact. The more flutes the tool has, the smaller the individual chippings will be. A further advantage of the multi-tooth cutter is a higher quality surface.

     

    Multi-tooth cutters are better suited than single-flute milling cutters when processing very hard plastics and harder types of aluminium (short chipping). Milling cutters with 4 or more flutes are predominantly used for steels.

    Please contact us.

     

     

    Differentiation according to the materials to be processed


    Wood is milled without coolant, at high speed. Because wood is a bad conductor of heat, high temperatures build up on the surface of the tool. The feed rate and depth must thus be chosen such that the surface of the wood is not scorched.

     

    Plastics are processed at medium speed and are cooled with water or alcohol, depending upon the type of material (hardness and plasticity). The cutting speed for metals embraces a wide spectrum, depending on the type of metal (brittle or ductile). Machine processing is done at 20-300 m/min. In series production or with workpieces requiring intensive milling, e.g. aircraft ribs, all parameters are optimally harmonised to one another and speeds of up to 10,000 m/min are possible, to increase efficiency. Coolants are used in most cases but there is however a clear tendency towards dry processing.

     

    The proportion the cost of coolant to the overall cost of a milled workpiece is between 10 and 20 %.

     

    The tools used also differ strongly in cutting material and shape. Contrary to wood and plastic milling cutters, metal milling cutters always have a positive chip angle and larger chipping spaces.

    Single-tooth milling cutters with right-hand spiral

    Single-tooth milling cutters with right-hand spiral

     

    These tools guarantee the highest cutting performance also on CNC engraving machines.
    Our single-flute milling cutters are suitable for HSC milling.
    Special versions are available upon request.

     

     

    Ø SL GL Schaft
    2 8 30 2
    2 10 40 2
    3 8 30 3
    3 10 40 3
    4 10 40 4
    4 14 50 4
    5 14 50 5
    5 16 60 5
    6 14 50 6
    6 20 60 6
    8 20 60 8
    8 25 75 8
    10 20 60 10
    10 25 75 10
    12 20 60 12
    12 25 75 12

    Single-tooth milling cutters with left-hand spiral

    Single-tooth milling cutters with left-hand spiral


    These tools guarantee the highest cutting performance also on CNC engraving machines.
    Our single-flute milling cutters are suitable for HSC milling.
    Special versions are available upon request.

    Single-tooth milling cutters, shank 3

     

     

    Single-tooth milling cutters, shank 3

    These tools guarantee the highest cutting performance also on CNC engraving machines.
    Our single-flute milling cutters are suitable for HSC milling.
    Special versions are available upon request.

     
    Ø SL GL Schaft
    1,0 4 40 3
    1,5 5 40 3
    2,0 8 40 3

    Single-tooth milling cutters, shank 4

     

     

    Single-tooth milling cutters, shank 4

     

    These tools guarantee the highest cutting performance also on CNC engraving machines.
    Our single-flute milling cutters are suitable for HSC milling.
    Special versions are available upon request.

     

     

     
    Ø SL GL Schaft
    1,0 4 33 4
    1,5 5 33 4
    2,0 5 33 4
    2,0 7 33 4
    2,5 8 33 4
    3,0 8 33 4
    3,0 10 33 4
    3,5 10 33 4
    4,0 10 33 4

    Single-tooth milling cutters, shank 6

     

    Single-tooth milling cutters, shank 6

     

    These tools guarantee the highest cutting performance also on CNC engraving machines.
    Our single-flute milling cutters are suitable for HSC milling.
    Special versions are available upon request.

     

    Ø SL GL Schaft
    1,5 5 40 6
    2,0 6 40 6
    2,0 7 40 6
    2,5 8 40 6
    3,0 10 40 6
    3,5 10 40 6
    4,0 12 40 6
    4,5 12 40 6
    5,0 14 40 6
    5,5 14 40 6
    6,0 14 40 6

     

    Multi-tooth milling cutters

     

     

    Multi-tooth milling cutters

     

    Multi-tooth cutters are better suited than single-flute milling cutters when processing very hard plastics and harder types of aluminium (short chipping). Milling cutters with 4 or more flutes are predominantly used for steels.

     

    Please contact us

    Engraving tools

    For engraving plastics and non-ferrous metals.
    The width must be ground by you, to suit your requirements.

    Engraving tools

    GravierfräserGravierstichel

    Engraving mill 60°

    tip angle 60°
    flutes 1
    spiral angle 30°

     

    For engraving plastics and non-ferrous metals.
    The width must be ground by you, to suit your requirements.
     

     

     

     

    Ø Schaft GL
    3 3 40
    4 4 40
    6 6 50

    De-burrers

    Specially developed for processing contours on CNC machines.

    To de-burr and chamfer metals and plastics.
    The de-burrers are also suitable for hard machining.

    De-burrers

     

    De-burrers

    Specially developed for processing contours on CNC machines.

     

    To de-burr and chamfer metals and plastics.
    The de-burrers are also suitable for hard machining.

     

    A tip angle of 90° is held as standard stock.
    4 - 6 mm de-burrers with 4 flutes, 8 mm and up with 5 flutes.

     

    Ø Schaft GL
    4 6 55
    6 6 55
    8 8 60
    10 10 60
    12 12 65
    -

    Special Tools

    It goes without saying that we exercise the highest possible degree of flexibility when manufacturing individual, custom built tools.

    Special Tools

     

     

    Special Tools

    It goes without saying that we exercise the highest possible degree of flexibility when manufacturing individual, custom built tools.

     

    Requirement-orientated solutions that are tailor-made to suit your requirements are produced to your specifications.

    Contact us.

     

    Coatings

    Contact us, if you want to expand your range of applications.

    Coatings

    Reibahle 1/100, Tin beschichtet

     

    Coatings

     

    We can offer you Tin, TiAlN, Futura and Helica coatings for all products ranges.

    Contact us, if you want to expand your range of applications.

    For our customer's benefit

    We have been manufacturing solid hard metal precision tools since 1986. Years of experience in the field of SHM reamers and SHM single-flute milling cutters, makes us a reliable, strong business partner.

     

    With the aid of the most modern CNC grinding technology and responsible, conscientious employees, we achieve above average precision and quality during the course of our daily work.

     

    It goes without saying that we exercise the highest possible degree of flexibility when manufacturing individual, custom built tools. Requirement-orientated solutions that are tailor-made to suit your requirements are produced to your specifications. Get in touch with us, we will be pleased to be of assistance, even with the most unusual of requests.

     

    Take advantage of our extremely short delivery times for 1/100 reamers from 0.1 mm to 13.5 mm. If your order by 11 am, the tools will be shipped the same day.

     

    Our thorough final inspection guarantees that all tools leave our premises in absolutely flawless condition. In the unlikely case that you have a complaint, we are always keen to resolve the matter as quickly as possible.

    Product catalogue

    Product catalogue Urbschat Tools

     

    You can download our latest product catalogue in PDF format here (approx. 2 MB).    

     

    Download catalogue

    Contact us!


    Have we aroused your interest, do you have any questions or would you like an appointment or would you like to order our products?

    Please call us, write us a letter or a fax, or send us an e-mail:


    info@urbschat-tools.de

    tel. +49 2333 5979
    fax. +49 2333 4683

     


    Urbschat-Tools GmbH
    Aufsicht 6
    D 58256 Ennepetal